Receive All Daily Updates By Sms Send "FOLLOW DAMYTECHS" to 40404 Now!!!

Thursday

How To Connect Two Laptops Using LAN Cable In Windows


The full meaning of LAN is "Local Area Network".
As a result of the rapid rate of technological upgrade; the use of computers and Laptops for our daily activities has largely increased. Recently the use of Laptop has increased because Laptops are portable and compact and provide many facilities and opportunities just in a single unit. Laptops are useful for office works as well as home activities. With the help of Laptops we can do our work where ever we like.

 It’s nowadays common that laptops has storage space of 500 GB or 1 TB .
Most a times, we use pendrive to transfer files/data from one device to another, just like we want to transfer whole data from one laptop to another.

So, to transfer data at higher speed  we can use a crossover LAN cable with RJ-45 connector to connect two laptops. It can transfer data with more than 200 MB per second. Even we recommend to use cloud storage services so we can easily access common data from any device.

Now, am going to explain to you how you can easily connect two laptops using LAN cable. Just in ten steps, there we go!!!.

Step 1. Connect the both laptops using crossover LAN cable with RJ-45 connector; simply by connecting one end of the cable to the first computer and the other end to the second computer.

Step 2. open the control panel and choose network and sharing center.

Step 3. Click on  “change adapter setting” option. After clicking the change adapter setting you will see a pop-up window.

Step 4. You will see  Lan adapters(on the pop-up page). Right click on “properly installed adapter” then, select its “properties”.
Step 5. In the properties sub-menu click on the “Internet protocol version 4”, then click on the “properties” button.

Step 6. Now enter IP addresses in both the laptops accordingly as given below:

Settings In First Computer Or Laptop:
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
Settings In Second computer Or Laptop:
IP address: 192.168.0.2
Subnet mask: 255.255.255.0 

Step 7. After Entering IP addresses restart your laptops and open the Network tab by entering network in the Windows Start menu.

Step 8. In Network tab you will see the list of all connected computer to the same network. After computers are successfully connected now you have to share drives to transfer files over network.

Step 9. Now right click the drives which you want to share and select the share with option. After that select advance sharing option.

Step 10. Now you’ve see the drive properties Window, click on the advance sharing button. You will see the next window with a check box. Tick the checkbox and click on “Ok” Button. You can also change permission to full control, change, and read only.

Finally, Share the folders that you want to transfer files from and that’s all!!!.

You’ve learnt how to transfer data by connecting two laptops using LAN cable on windows operating system. Share this post and drop your comment if this post was helpful to you or if you have any bordering question in mind let us know!.
Thanks.







SHARE THIS POST :-
Receive daily tech updates!

Enter your email address:

Delivered by Damytechs FeedBurner

No comments:

Post a Comment

We are glad you're here Don't miss any important info
Suscribe to our daily updates now :
GET DAILY UPDATES HERE